FANDOM


(Created page with '{{incomplete}} This is a circuit to test zener diodes. ==Components== * S1: SPDT switch * S2: Pushbutton switch * S3: Pushbutton switch * N1: Neon lamp * D1…')
 
Line 1: Line 1:
{{incomplete}}
 
 
This is a [[circuit]] to test [[zener diode]]s.
 
This is a [[circuit]] to test [[zener diode]]s.
  +
  +
==Warning==
  +
It should be noted that this circuit could be dangerous. It is tied directly to an AC line, and has an output of 300V. The output has resistors on each line, which limits the current making it a bit safer, but will still give you quite a shock.
  +
  +
  +
'''It should be switched off while attaching diode'''
   
 
==Components==
 
==Components==
Line 6: Line 11:
 
* S1: [[SPDT switch]]
 
* S1: [[SPDT switch]]
 
* S2: [[Pushbutton switch]]
 
* S2: [[Pushbutton switch]]
* S3: Pushbutton switch
 
 
* N1: [[Neon lamp]]
 
* N1: [[Neon lamp]]
 
* D1: 1N4004, 1A 400V [[Rectifier]]
 
* D1: 1N4004, 1A 400V [[Rectifier]]
Line 12: Line 16:
 
* C1: [[Electrolytic Capacitor]] 100uF 200V
 
* C1: [[Electrolytic Capacitor]] 100uF 200V
 
* C2: Electrolytic Capacitor 100uF 200V
 
* C2: Electrolytic Capacitor 100uF 200V
* R1: 100kΩ [[Resistor]] 1/2W
+
* R1: 33kΩ [[Resistor]] 1/2W
 
* R2: 2.7kΩ Resistor 1/4W
 
* R2: 2.7kΩ Resistor 1/4W
 
* R3: 1MΩ Resistor 1/4W
 
* R3: 1MΩ Resistor 1/4W
Line 19: Line 23:
   
 
==Circuit==
 
==Circuit==
+
[[image:Zener-diode-tester-schematic.svg]]
   
 
==Description==
 
==Description==

Revision as of 15:43, February 14, 2010

This is a circuit to test zener diodes.

Warning

It should be noted that this circuit could be dangerous. It is tied directly to an AC line, and has an output of 300V. The output has resistors on each line, which limits the current making it a bit safer, but will still give you quite a shock.


It should be switched off while attaching diode

Components

  • S1: SPDT switch
  • S2: Pushbutton switch
  • N1: Neon lamp
  • D1: 1N4004, 1A 400V Rectifier
  • D2: 1N4004, 1A 400V Rectifier
  • C1: Electrolytic Capacitor 100uF 200V
  • C2: Electrolytic Capacitor 100uF 200V
  • R1: 33kΩ Resistor 1/2W
  • R2: 2.7kΩ Resistor 1/4W
  • R3: 1MΩ Resistor 1/4W
  • R4: 24kΩ Resistor 1W, or 2x 48kΩ Resistor 1/2W in parallel.
  • R5: 48kΩ Resistor 1W, or 2x 100kΩ Resistor 1/2W in parallel.

Circuit

File:Zener-diode-tester-schematic.svg

Description

Community content is available under CC-BY-SA unless otherwise noted.